APPLICATION RANGE
Chevron conveyor belts are used to carry wet, loose and ne materials such as coal, minerals, metal ore, aggregates, concrete, grain, slurry and waste products on steep inclines. The raised ribs of the chevron belt prevent the material from running back and increase the capacity of material that can be conveyed at steep angles between 18˚ and 45˚.
CARCASS STRUCTURE
The carcass normally consists of 2 – 4 plies of synthetic EP (Polyester – Polyamide) fabric. EP fabric is preferred for its low elongation, moisture and impact resistance.BELT WIDTH RANGE
Steadfast standard chevron belts are available from 400mm to 1600mm wide.
CHEVRON PROFILE RANGE
Steadfast offers over 35 chevron pattern profiles with 15mm, 35mm and 32mm high chevrons cleats. Available with open or closed ‘V’ and ‘U’ shaped profiles. Profile widths range from 250mm to 1500mm.
Products:
| 15MM CLEAT RANGE | 25MM CLEAT RANGE | 32MM CLEAT RANGE |
| C15 – 287 436 585 | C25 – 915 | C32 – 450 880 1280 1480 |
| C15 – 315 480 650 | C25 – 450 750 | |
| C15 – 310 400 | ||
| C15 – 750 |
| STEADFAST STANDARD | TYPE | TENSILE STRENGTH | ELONGATION AT BREAK | ABRASION LOSS | WORKING TEMPERATURE (MAX ˚C) |
| Abrasion resistant | W | 180 | 400 | 90 | 70 |
| X | 250 | 450 | 120 | 70 | |
| Y | 200 | 400 | 150 | 70 | |
| Z | 150 | 70 | 250 | 70 | |
| Heat resistant | T2 | 150 | 450 | 150 | 120 |
| T3 | 120 | 350 | 200 | 150 | |
| Oil resistant | MOR | 150 | 350 | 200 | 70 |
| G | 140 | 350 | 200 | 80 | |
| SOR | 150 | 350 | 150 | 100 |